Как настроить MySQL Multi-Master Replication в Oracle Linux
На этой странице
- 1. Предварительное примечание
- 2. Этап установки
- 3. Фаза конфигурации
- 4. Этап тестирования
В этом руководстве объясняется, как установить и настроить репликацию MySQL с несколькими мастерами в Oracle Linux. Как вы все, возможно, уже знаете, MySQL – это хорошо известный первоклассный продукт для баз данных, который доказал свою готовность к использованию на предприятиях. Поскольку данные имеют решающее значение для каждой организации, большинство администраторов баз данных ищут подходящее решение для настройки высокой доступности, чтобы пользователи могли получать доступ к своим данным круглосуточно и без выходных. Репликация MySQL — это решение, которое может обеспечить политику высокой доступности. Кроме того, репликация MySQL также может помочь администраторам баз данных распределить нагрузку на несколько серверов баз данных путем балансировки нагрузки запросов READ и WRITE. К сожалению, базовая репликация может предложить преимущества только для запросов READ. В связи с этим была введена репликация MySQL с несколькими мастерами, которая также предлагает репликацию для запроса WRITE.
1. Предварительное примечание
Для этого руководства я использую Oracle Linux 6.8 в 32-битной версии. Обратите внимание, что несмотря на то, что конфигурация выполняется в Oracle Linux, шаги и конфигурация в основном одинаковы для CentOS и Red Hat Linux. В этом уроке мы будем использовать 2 сервера. На каждом из них мы установим базу данных MySQL и настроим ее для репликации с несколькими мастерами. В конце этого руководства мы увидим, что любой запрос READ или WRITE, включая запросы DDL (язык определения данных) и DML (язык манипулирования данными), будет выполняться на обоих серверах.
2. Этап установки
На этапе установки нам требуется только пакет сервера MySQL для этапа настройки и клиент MySQL для доступа к среде базы данных. Оба пакета требуют установки некоторых зависимостей. Во-первых, давайте подтвердим версию нашей операционной системы и запишем IP-адрес для предварительной настройки.
[ ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 08:00:27:42:C0:4C
inet addr:192.168.43.11 Bcast:192.168.43.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe42:c04c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:544 errors:0 dropped:0 overruns:0 frame:0
TX packets:79 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:51274 (50.0 KiB) TX bytes:9474 (9.2 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:240 (240.0 b) TX bytes:240 (240.0 b)
Теперь сделайте то же самое на другом сервере.
[ ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 09:00:30:42:C1:5D
inet addr:192.168.43.12 Bcast:192.168.43.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe42:c04c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:544 errors:0 dropped:0 overruns:0 frame:0
TX packets:79 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:51274 (50.0 KiB) TX bytes:9474 (9.2 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:240 (240.0 b) TX bytes:240 (240.0 b)
Затем добавьте IP-адрес в файл hosts сервера. Сделайте то же самое на обоих серверах, как показано ниже.
[ ~]# vi /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.43.11 DB1
192.168.43.12 DB2
Далее я настрою новый репозиторий для установки пакетов сервера и клиента MySQL с помощью утилиты yum. Пожалуйста, сделайте это на ОБОИХ серверах.
[ yum.repos.d]# ls
CentOS.repo mysql-community.repo
mysql-community-release-el6-5.noarch.rpm mysql-community-source.repo
Установлен новый репозиторий для последней версии MySQL. Позволяет включить их.
[ yum.repos.d]# vi mysql-community.repo
# Enable to use MySQL 5.6
[mysql56-community]
name=MySQL 5.6 Community Server
baseurl=http://repo.mysql.com/yum/mysql-5.6-community/el/6/$basearch/
enabled=1
gpgcheck=1
gpgkey=file:/etc/pki/rpm-gpg/RPM-GPG-KEY-mysql
После этого давайте удостоверимся, что пакеты MySQL доступны.
[ yum.repos.d]# rpm -qa|grep -i mysql
mysql-community-release-el6-5.noarch
Отлично, теперь мы сделали половину пути. Поскольку на текущем сервере не установлены пакеты MySQL, давайте начнем установку пакета. Ниже приведены шаги.
[>
Package: mysql-community-release-el6-5.noarch (installed)
From : file:/etc/pki/rpm-gpg/RPM-GPG-KEY-mysql
Is this ok [y/N]: y
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Warning: RPMDB altered outside of yum.
Installing : mysql-community-common-5.6.36-2.el6.i686 1/5
Installing : mysql-community-libs-5.6.36-2.el6.i686 2/5
Installing : mysql-community-client-5.6.36-2.el6.i686 3/5
Installing : perl-DBI-1.609-4.el6.i686 4/5
Installing : mysql-community-server-5.6.36-2.el6.i686 5/5
Verifying : perl-DBI-1.609-4.el6.i686 1/5
Verifying : mysql-community-server-5.6.36-2.el6.i686 2/5
Verifying : mysql-community-libs-5.6.36-2.el6.i686 3/5
Verifying : mysql-community-common-5.6.36-2.el6.i686 4/5
Verifying : mysql-community-client-5.6.36-2.el6.i686 5/5
Installed:
mysql-community-server.i686 0:5.6.36-2.el6
Dependency Installed:
mysql-community-client.i686 0:5.6.36-2.el6 mysql-community-common.i686 0:5.6.36-2.el6
mysql-community-libs.i686 0:5.6.36-2.el6 perl-DBI.i686 0:1.609-4.el6
Complete!
Отлично, теперь установка завершена. Запустите демон MySQL в первый раз.
[ yum.repos.d]# service mysqld restart
Stopping mysqld: [ OK ]
Initializing MySQL database: 2017-05-22 09:55:53 0 [Warning] TIMESTAMP with implicit DEFAULT value is deprecated. Please use --explicit_defaults_for_timestamp server option (see documentation for more details).
2017-05-22 09:55:53 0 [Note] Ignoring --secure-file-priv value as server is running with --bootstrap.
2017-05-22 09:55:53 0 [Note] /usr/sbin/mysqld (mysqld 5.6.36) starting as process 18645 ...
2017-05-22 09:55:53 18645 [Note] InnoDB: Using atomics to ref count buffer pool pages
2017-05-22 09:55:53 18645 [Note] InnoDB: The InnoDB memory heap is disabled
2017-05-22 09:55:53 18645 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins
2017-05-22 09:55:53 18645 [Note] InnoDB: Memory barrier is not used
2017-05-22 09:55:53 18645 [Note] InnoDB: Compressed tables use zlib 1.2.3
2017-05-22 09:55:53 18645 [Note] InnoDB: Using Linux native AIO
2017-05-22 09:55:53 18645 [Note] InnoDB: Using CPU crc32 instructions
2017-05-22 09:55:53 18645 [Note] InnoDB: Initializing buffer pool, size = 128.0M
2017-05-22 09:55:53 18645 [Note] InnoDB: Completed initialization of buffer pool
2017-05-22 09:55:53 18645 [Note] InnoDB: The first specified data file ./ibdata1 did not exist: a new database to be created!
2017-05-22 09:55:53 18645 [Note] InnoDB: Setting file ./ibdata1 size to 12 MB
2017-05-22 09:55:53 18645 [Note] InnoDB: Database physically writes the file full: wait...
2017-05-22 09:55:53 18645 [Note] InnoDB: Setting log file ./ib_logfile101 size to 48 MB
2017-05-22 09:55:53 18645 [Note] InnoDB: Setting log file ./ib_logfile1 size to 48 MB
2017-05-22 09:55:53 18645 [Note] InnoDB: Renaming log file ./ib_logfile101 to ./ib_logfile0
2017-05-22 09:55:53 18645 [Warning] InnoDB: New log files created, LSN=45781
2017-05-22 09:55:53 18645 [Note] InnoDB: Doublewrite buffer not found: creating new
2017-05-22 09:55:53 18645 [Note] InnoDB: Doublewrite buffer created
2017-05-22 09:55:53 18645 [Note] InnoDB: 128 rollback segment(s) are active.
2017-05-22 09:55:53 18645 [Warning] InnoDB: Creating foreign key constraint system tables.
2017-05-22 09:55:53 18645 [Note] InnoDB: Foreign key constraint system tables created
2017-05-22 09:55:53 18645 [Note] InnoDB: Creating tablespace and datafile system tables.
2017-05-22 09:55:53 18645 [Note] InnoDB: Tablespace and datafile system tables created.
2017-05-22 09:55:53 18645 [Note] InnoDB: Waiting for purge to start
2017-05-22 09:55:53 18645 [Note] InnoDB: 5.6.36 started; log sequence number 0
2017-05-22 09:55:54 18645 [Note] Binlog end
2017-05-22 09:55:54 18645 [Note] InnoDB: FTS optimize thread exiting.
2017-05-22 09:55:54 18645 [Note] InnoDB: Starting shutdown...
2017-05-22 09:55:55 18645 [Note] InnoDB: Shutdown completed; log sequence number 1625977
2017-05-22 09:55:55 0 [Warning] TIMESTAMP with implicit DEFAULT value is deprecated. Please use --explicit_defaults_for_timestamp server option (see documentation for more details).
2017-05-22 09:55:55 0 [Note] Ignoring --secure-file-priv value as server is running with --bootstrap.
2017-05-22 09:55:55 0 [Note] /usr/sbin/mysqld (mysqld 5.6.36) starting as process 18667 ...
2017-05-22 09:55:55 18667 [Note] InnoDB: Using atomics to ref count buffer pool pages
2017-05-22 09:55:55 18667 [Note] InnoDB: The InnoDB memory heap is disabled
2017-05-22 09:55:55 18667 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins
2017-05-22 09:55:55 18667 [Note] InnoDB: Memory barrier is not used
2017-05-22 09:55:55 18667 [Note] InnoDB: Compressed tables use zlib 1.2.3
2017-05-22 09:55:55 18667 [Note] InnoDB: Using Linux native AIO
2017-05-22 09:55:55 18667 [Note] InnoDB: Using CPU crc32 instructions
2017-05-22 09:55:55 18667 [Note] InnoDB: Initializing buffer pool, size = 128.0M
2017-05-22 09:55:55 18667 [Note] InnoDB: Completed initialization of buffer pool
2017-05-22 09:55:55 18667 [Note] InnoDB: Highest supported file format is Barracuda.
2017-05-22 09:55:55 18667 [Note] InnoDB: 128 rollback segment(s) are active.
2017-05-22 09:55:55 18667 [Note] InnoDB: Waiting for purge to start
2017-05-22 09:55:55 18667 [Note] InnoDB: 5.6.36 started; log sequence number 1625977
2017-05-22 09:55:55 18667 [Note] Binlog end
2017-05-22 09:55:55 18667 [Note] InnoDB: FTS optimize thread exiting.
2017-05-22 09:55:55 18667 [Note] InnoDB: Starting shutdown...
2017-05-22 09:55:57 18667 [Note] InnoDB: Shutdown completed; log sequence number 1625987
PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
To do so, start the server, then issue the following commands:
/usr/bin/mysqladmin -u root password 'new-password'
/usr/bin/mysqladmin -u root -h vdevknime1 password 'new-password'
Alternatively you can run:
/usr/bin/mysql_secure_installation
which will also give you the option of removing the test
databases and anonymous user created by default. This is
strongly recommended for production servers.
See the manual for more instructions.
Please report any problems at http://bugs.mysql.com/
The latest information about MySQL is available on the web at
http://www.mysql.com
Support MySQL by buying support/licenses at http://shop.mysql.com
Note: new default config file not created.
Please make sure your config file is current
WARNING: Default config file /etc/my.cnf exists on the system
This file will be read by default by the MySQL server
If you do not want to use this, either remove it, or use the
#NAME?
[ OK ]
Starting mysqld: [ OK ]
Отлично, теперь служба сервера MySQL запущена. Давайте подтвердим это, указав порт, используемый службой MySQL. По умолчанию MySQL будет использовать порт 3306 при запуске службы. Ниже приведены команды:
[ yum.repos.d]# netstat -apn|grep -i mysql
tcp 0 0 :::3306 :::* LISTEN 2139/mysqld
unix 2 [ ACC ] STREAM LISTENING 16018 2139/mysqld /var/lib/mysql/mysql.sock
Теперь давайте установим начальный пароль для пользователя root MySQL, чтобы убедиться, что мы не упустили базовую безопасность для нашего сервера MySQL.
[ |
+----------------+
1 row in set (0.00 sec)
С этапом установки покончено. Перейдем к настройке настройки репликации с несколькими мастерами.
3. Этап настройки
Давайте зайдем в файл конфигурации MySQL my.cnf и внесем изменения, как показано ниже, на сервере DB1.
[ ~]# vi /etc/my.cnf
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
port=3306
innodb_file_per_table=ON
pid-file=/var/lib/mysql/mysqld.pid
server-id = 11
log_bin = /var/log/mysql/mysql-bin.log
binlog_do_db = test_rep
Ниже приведено объяснение конфигурации:
- server-id ==> ID репликации
- log_bin ==> Файл журнала, используемый для репликации.
- binlog_do_db ==> База данных, связанная с процессом репликации
После этого давайте войдем в среду сервера MySQL, создадим соответствующую базу данных и назначим пользователя для процесса репликации.
[ ~]# mysql -u root -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 5
Server version: 5.6.36-log MySQL Community Server (GPL)
Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| mysql |
| performance_schema |
| test |
+--------------------+
4 rows in set (0.01 sec)
mysql> create database test_rep;
Query OK, 1 row affected (0.01 sec)
mysql> create user 'replicator'@'DB2' identified by 'Rep1234';
Query OK, 0 rows affected (0.01 sec)
mysql> grant replication slave on *.* to 'replicator'@'DB2';
Query OK, 0 rows affected (0.00 sec)
Готово, теперь перезапустите сервер MySQL и посмотрите, активировалась ли конфигурация или нет. Ниже приведены шаги:
[ ~]# mysql -u root -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 5
Server version: 5.6.36-log MySQL Community Server (GPL)
Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> show master status;
+-------------------+----------+--------------+------------------+-------------------+
| File | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |
+-------------------+----------+--------------+------------------+-------------------+
| mysql-bin.000001 | 854 | test_rep | | |
+-------------------+----------+--------------+------------------+-------------------+
1 row in set (0.00 sec)
Отлично, теперь давайте настроим сервер DB2 в качестве подчиненного сервера для главного сервера репликации DB1, а также настроим сервер DB2 также в качестве главного для сервера DB1. Ниже приведены шаги:
[ ~]# vi /etc/my.cnf
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
port=3306
innodb_file_per_table=ON
pid-file=/var/lib/mysql/mysqld.pid
server-id = 12
log_bin = /var/log/mysql/mysql-bin.log
binlog_do_db = test_rep
То же самое, что и конфигурация в DB1, давайте войдем в среду сервера MySQL, создадим соответствующую базу данных и назначим пользователя для процесса репликации.
[ ~]# mysql -u root -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 5
Server version: 5.6.36-log MySQL Community Server (GPL)
Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| mysql |
| performance_schema |
| test |
+--------------------+
4 rows in set (0.01 sec)
mysql> create database test_rep;
Query OK, 1 row affected (0.01 sec)
mysql> create user 'replicator'@'DB1' identified by 'Rep1234';
Query OK, 0 rows affected (0.01 sec)
mysql> grant replication slave on *.* to 'replicator'@'DB1';
Query OK, 0 rows affected (0.00 sec)
mysql> show slave status;
Empty set (0.01 sec)
Готово, теперь давайте перезапустим сервер DB2 MySQL и посмотрим, активирована ли конфигурация или нет. Если да, то продолжаем создавать подчиненный сервер для сервера DB1.
[ ~]# mysql -u root -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 5
Server version: 5.6.36-log MySQL Community Server (GPL)
Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> show master status;
+-------------------+----------+--------------+------------------+-------------------+
| File | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |
+-------------------+----------+--------------+------------------+-------------------+
| mysql-bin.000001 | 553 | test_rep | | |
+-------------------+----------+--------------+------------------+-------------------+
1 row in set (0.00 sec)
mysql> stop slave;
Query OK, 0 rows affected, 1 warning (0.00 sec)
mysql> CHANGE MASTER TO MASTER_HOST = 'DB1', MASTER_PORT = 3306, MASTER_USER = 'replicator', MASTER_PASSWORD = 'Rep1234', MASTER_LOG_FILE = 'mysql-bin.000001', MASTER_LOG_POS = 854;
Query OK, 0 rows affected, 2 warnings (0.07 sec)
mysql> start slave;
Query OK, 0 rows affected (0.04 sec)
mysql> show slave status\G;
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: DB1
Master_User: replicator
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: mysql-bin.000001
Read_Master_Log_Pos: 854
Relay_Log_File: mysqld-relay-bin.000002
Relay_Log_Pos: 284
Relay_Master_Log_File: mysql-bin.000001
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
Replicate_Do_DB:
Replicate_Ignore_DB:
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 0
Last_Error:
Skip_Counter: 0
Exec_Master_Log_Pos: 854
Relay_Log_Space: 459
Until_Condition: None
Until_Log_File:
Until_Log_Pos: 0
Master_SSL_Allowed: No
Master_SSL_CA_File:
Master_SSL_CA_Path:
Master_SSL_Cert:
Master_SSL_Cipher:
Master_SSL_Key:
Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
Last_IO_Errno: 0
Last_IO_Error:
Last_SQL_Errno: 0
Last_SQL_Error:
Replicate_Ignore_Server_Ids:
Master_Server_Id: 11
Master_UUID: 6e143d91-3635-11e7-b9ad-08002742c04c
Master_Info_File: /var/lib/mysql/master.info
SQL_Delay: 0
SQL_Remaining_Delay: NULL
Slave_SQL_Running_State: Slave has read all relay log; waiting for the slave I/O thread to update it
Master_Retry_Count: 86400
Master_Bind:
Last_IO_Error_Timestamp:
Last_SQL_Error_Timestamp:
Master_SSL_Crl:
Master_SSL_Crlpath:
Retrieved_Gtid_Set:
Executed_Gtid_Set:
Auto_Position: 0
1 row in set (0.00 sec)
ERROR:
No query specified
mysql> show slave status;
+----------------------------------+---------------+-------------+-------------+---------------+-------------------+---------------------+--------------------------+---------------+-----------------------+------------------+-------------------+-----------
| Slave_IO_State | Master_Host | Master_User | Master_Port | Connect_Retry | Master_Log_File | Read_Master_Log_Pos | Relay_Log_File | Relay_Log_Pos | Relay_Master_Log_File | Slave_IO_Running | Slave_SQL_Running | Replicate_Do_DB | Replicate_Ignore_DB | Replicate_Do_Table | Replicate_Ignore_Table | Replicate_Wild_Do_Table | Replicate_Wild_Ignore_Table | Last_Errno | Last_Error | Skip_Counter | Exec_Master_Log_Pos | Relay_Log_Space | Until_Condition | Until_Log_File | Until_Log_Pos | Master_SSL_Allowed | Master_SSL_CA_File | Master_SSL_CA_Path | Master_SSL_Cert | Master_SSL_Cipher | Master_SSL_Key | Seconds_Behind_Master | Master_SSL_Verify_Server_Cert | Last_IO_Errno | Last_IO_Error | Last_SQL_Errno | Last_SQL_Error | Replicate_Ignore_Server_Ids | Master_Server_Id | Master_UUID | Master_Info_File | SQL_Delay | SQL_Remaining_Delay | Slave_SQL_Running_State | Master_Retry_Count | Master_Bind | Last_IO_Error_Timestamp | Last_SQL_Error_Timestamp | Master_SSL_Crl | Master_SSL_Crlpath | Retrieved_Gtid_Set | Executed_Gtid_Set | Auto_Position |
+----------------------------------+---------------+-------------+-------------+---------------+-------------------+---------------------+--------------------------+---------------+-----------------------+------------------+-------------------+-----------
| Waiting for master to send event | DB1 | replicator | 3306 | 60 | mysql-bin.000001 | 854 | mysqld-relay-bin.000002 | 284 | mysql-bin.000001 | Yes | Yes | | | | | | | 0 | | 0 | 854 | 459 | None | | 0 | No | | | | | | 0 | No | 0 | | 0 | | | 11 | 6e143d91-3635-11e7-b9ad-08002742c04c | /var/lib/mysql/master.info | 0 | NULL | Slave has read all relay log; waiting for the slave I/O thread to update it | 86400 | | | | | | | | 0 |
+----------------------------------+---------------+-------------+-------------+---------------+-------------------+---------------------+--------------------------+---------------+-----------------------+------------------+-------------------+-----------
1 row in set (0.00 sec)
Большой! Поскольку все настроено для сервера DB2, вернитесь к серверу DB1 и настройте подчиненную конфигурацию для сервера DB2.
[ ~]# mysql -u root -p
Enter password:
Warning: Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 11
Server version: 5.6.36-log MySQL Community Server (GPL)
Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> show master status;
+-------------------+----------+--------------+------------------+-------------------+
| File | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |
+-------------------+----------+--------------+------------------+-------------------+
| mysql-bin.000001 | 854 | test_rep | | |
+-------------------+----------+--------------+------------------+-------------------+
1 row in set (0.01 sec)
mysql> stop slave;
Query OK, 0 rows affected, 1 warning (0.00 sec)
mysql> CHANGE MASTER TO MASTER_HOST = 'DB2', MASTER_PORT = 3306, MASTER_USER = 'replicator', MASTER_PASSWORD = 'Rep1234', MASTER_LOG_FILE = 'mysql-bin.000001', MASTER_LOG_POS = 553;
Query OK, 0 rows affected, 2 warnings (0.25 sec)
mysql> start slave;
Query OK, 0 rows affected (0.03 sec)
mysql> show slave status;
+----------------------------------+---------------+-------------+-------------+---------------+-------------------+---------------------+--------------------------+---------------+-----------------------+------------------+-------------------+-----------
| Slave_IO_State | Master_Host | Master_User | Master_Port | Connect_Retry | Master_Log_File | Read_Master_Log_Pos | Relay_Log_File | Relay_Log_Pos | Relay_Master_Log_File | Slave_IO_Running | Slave_SQL_Running | Replicate_Do_DB | Replicate_Ignore_DB | Replicate_Do_Table | Replicate_Ignore_Table | Replicate_Wild_Do_Table | Replicate_Wild_Ignore_Table | Last_Errno | Last_Error | Skip_Counter | Exec_Master_Log_Pos | Relay_Log_Space | Until_Condition | Until_Log_File | Until_Log_Pos | Master_SSL_Allowed | Master_SSL_CA_File | Master_SSL_CA_Path | Master_SSL_Cert | Master_SSL_Cipher | Master_SSL_Key | Seconds_Behind_Master | Master_SSL_Verify_Server_Cert | Last_IO_Errno | Last_IO_Error | Last_SQL_Errno | Last_SQL_Error | Replicate_Ignore_Server_Ids | Master_Server_Id | Master_UUID | Master_Info_File | SQL_Delay | SQL_Remaining_Delay | Slave_SQL_Running_State | Master_Retry_Count | Master_Bind | Last_IO_Error_Timestamp | Last_SQL_Error_Timestamp | Master_SSL_Crl | Master_SSL_Crlpath | Retrieved_Gtid_Set | Executed_Gtid_Set | Auto_Position |
+----------------------------------+---------------+-------------+-------------+---------------+-------------------+---------------------+--------------------------+---------------+-----------------------+------------------+-------------------+-----------
| Waiting for master to send event | DB2 | replicator | 3306 | 60 | mysql-bin.000001 | 553 | mysqld-relay-bin.000002 | 284 | mysql-bin.000001 | Yes | Yes | | | | | | | 0 | | 0 | 553 | 459 | None | | 0 | No | | | | | | 0 | No | 0 | | 0 | | | 12 | 14f5ab41-3c7b-11e7-a293-08002742c04c | /var/lib/mysql/master.info | 0 | NULL | Slave has read all relay log; waiting for the slave I/O thread to update it | 86400 | | | | | | | | 0 |
+----------------------------------+---------------+-------------+-------------+---------------+-------------------+---------------------+--------------------------+---------------+-----------------------+------------------+-------------------+-----------
1 row in set (0.01 sec)
mysql> show slave status\G;
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: DB2
Master_User: replicator
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: mysql-bin.000001
Read_Master_Log_Pos: 553
Relay_Log_File: mysqld-relay-bin.000002
Relay_Log_Pos: 284
Relay_Master_Log_File: mysql-bin.000001
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
Replicate_Do_DB:
Replicate_Ignore_DB:
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 0
Last_Error:
Skip_Counter: 0
Exec_Master_Log_Pos: 553
Relay_Log_Space: 459
Until_Condition: None
Until_Log_File:
Until_Log_Pos: 0
Master_SSL_Allowed: No
Master_SSL_CA_File:
Master_SSL_CA_Path:
Master_SSL_Cert:
Master_SSL_Cipher:
Master_SSL_Key:
Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
Last_IO_Errno: 0
Last_IO_Error:
Last_SQL_Errno: 0
Last_SQL_Error:
Replicate_Ignore_Server_Ids:
Master_Server_Id: 12
Master_UUID: 14f5ab41-3c7b-11e7-a293-08002742c04c
Master_Info_File: /var/lib/mysql/master.info
SQL_Delay: 0
SQL_Remaining_Delay: NULL
Slave_SQL_Running_State: Slave has read all relay log; waiting for the slave I/O thread to update it
Master_Retry_Count: 86400
Master_Bind:
Last_IO_Error_Timestamp:
Last_SQL_Error_Timestamp:
Master_SSL_Crl:
Master_SSL_Crlpath:
Retrieved_Gtid_Set:
Executed_Gtid_Set:
Auto_Position: 0
1 row in set (0.00 sec)
ERROR:
No query specified
Отлично сделано, теперь, когда все готово, давайте приступим к этапу тестирования, чтобы сделать вывод, что все настройки были выполнены правильно.
4. Этап тестирования
Прежде чем мы начнем тест, давайте сделаем предположения относительно ожиданий конечного результата. Для этого теста мы создадим таблицу на сервере DB1 MySQL, а затем на DB2 проверим, существует ли таблица автоматически или нет. Если да, то мы добавим в него новую строку данных и снова проверим на сервере DB1, доступны ли новые данные на обоих серверах.
[ ~]# mysql -u root -p test_rep
Enter password:
Warning: Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 16
Server version: 5.6.36-log MySQL Community Server (GPL)
Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> select database();
+------------+
| database() |
+------------+
| test_rep |
+------------+
1 row in set (0.00 sec)
mysql> create table tbl1( id int(11) primary key auto_increment, fullname varchar(30));
Query OK, 0 rows affected (0.22 sec)
mysql> show tables in test_rep;
+--------------------+
| Tables_in_test_rep |
+--------------------+
| tbl1 |
+--------------------+
1 row in set (0.01 sec)
Готово, поскольку создание таблицы представляет собой оператор DDL (язык определения данных), нет необходимости вводить команду фиксации. Теперь давайте зайдем внутрь сервера DB2 MySQL и посмотрим, существует ли вновь созданная таблица.
[ ~]# mysql -u root -p test_rep
Enter password:
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 8
Server version: 5.6.36-log MySQL Community Server (GPL)
Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> show tables in test_rep;
+--------------------+
| Tables_in_test_rep |
+--------------------+
| tbl1 |
+--------------------+
1 row in set (0.00 sec)
mysql> insert into tbl1 ( fullname ) values ('Shahril'), ('mark'), ('Allen'), ('Suzy'), ('Adam') ;
Query OK, 5 rows affected (0.05 sec)
Records: 5 Duplicates: 0 Warnings: 0
mysql> select * from tbl1;
+----+----------+
| id | fullname |
+----+----------+
| 1 | Shahril |
| 2 | mark |
| 3 | Allen |
| 4 | Suzy |
| 5 | Adam |
+----+----------+
5 rows in set (0.00 sec)
mysql> commit;
Query OK, 0 rows affected (0.00 sec)
Отлично, обратите внимание, что новая таблица, созданная на сервере DB1, теперь автоматически существует на сервере DB2 MySQL. Затем нам также удалось вставить 5 строк данных в таблицу. Для окончательной проверки давайте посмотрим, видны ли обновленные строки в таблице TBL1 на сервере DB1.
[ ~]# mysql -u root -p test_rep
Enter password:
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 8
Server version: 5.6.36-log MySQL Community Server (GPL)
Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> select * from tbl1;
+----+----------+
| id | fullname |
+----+----------+
| 1 | Shahril |
| 2 | mark |
| 3 | Allen |
| 4 | Suzy |
| 5 | Adam |
+----+----------+
5 rows in set (0.01 sec)
mysql> delete from tbl1 where fullname like 'A%';
Query OK, 2 rows affected (0.07 sec)
mysql> select * from tbl1;
+----+----------+
| id | fullname |
+----+----------+
| 1 | Shahril |
| 2 | mark |
| 4 | Suzy |
+----+----------+
3 rows in set (0.00 sec)
Пальцы вверх! Мы успешно создали репликацию MySQL с несколькими мастерами между двумя серверами.